High-performance ball, gate, globe, check, and butterfly valves manufactured in a 280,000 sq ft integrated foundry and machining campus. Pressures up to 2,500 PSI. Over 1.2 million units installed across 47 countries. Zero field failures across the 2022–2024 shipment cohort.
Twenty-six years of metallurgical discipline and on-stream performance — measured against the operating conditions your plant actually runs.
Founded in Houston as a specialty repair shop in 1998; transitioned to full OEM ball, gate, globe, check, and butterfly valve production in 2003. Currently 412 skilled employees on a 280,000 sq ft integrated foundry, machining, and assembly campus.
Service hubs in Houston, Rotterdam, Singapore, and Dubai support fielded units across six continents. Trusted supplier to 14 of the Fortune Global 500 energy and chemicals companies. Zero field-failure rate across the 2022–2024 shipment cohort (38,400 units).
Seven active patents covering fire-safe seat designs and fugitive-emission packing systems. The X-Series carries API 607 7th Edition certification with a 30-minute 760°C burn rating — independently witnessed and traceable to serial number.
In-house spectral analysis and full bar-stock-to-shipped-valve traceability keep stocked carbon steel and stainless assemblies moving in 11 days against an industry average of six weeks. Dedicated engineering response within four business hours for submittal drawings and 3D models.
A consolidated valve portfolio cast, machined, and assembled under one quality system — eliminating the multi-vendor traceability gap that complicates shutdown spares and MOC packages.
Two- and three-piece trunnion and floating ball valves from 1/2" through 64", Class 150 through Class 2500. Fire-Safe X-Series available across the range with API 607 7th Edition certification, double-block-and-bleed cavity relief, and fugitive-emission packing to ISO 15848.
Flexible and solid wedge gate valves engineered for on-off isolation in pipeline service. Resilient and metal-to-metal seated options. API 600 / API 603 compliant.
Precision globe valves for flow regulation and throttling service. Plug-and-seat geometry tuned for tight shutoff and stable control across the full travel range.
Swing, lift, tilting-disc, and dual-plate check valves that prevent backflow in pumps, compressors, and process headers. Non-slam options for pulsating service.
Wafer, lug, and double-flanged butterfly valves for space-constrained service. Resilient seated and metal-seated fire-safe variants for hydrocarbon and water applications.
Seven active patents. One mission: keep a flame on the outside of the line and keep the process sealed on the inside. The X-Series ball and gate families hold tight under the API 607 seventh-edition burn protocol — thirty minutes at 760°C, both sides, zero leakage past the seat envelope.
Four hard metrics that procurement engineers can audit against their own records — pulled from the 2022–2024 production cohort and our internal service log.
Across 38,400 valves shipped in the 2022–2024 cohort. Zero reported seat or stem failures in service.
Stocked carbon steel and stainless assemblies ship in 11 days — against an industry average of 6 weeks.
Submittal drawings, GA sets, and 3D STEP models returned within four business hours, weekdays.
Foundry, machinists, quality engineers, and NDE inspectors on a single 280,000 sq ft Texas campus.
Quality is not a checklist at the receiving dock — it is the temperature of the melt and the chatter mark on a turned seat. Every RSC valve is poured, machined, assembled, and tested on a single 280,000 sq ft campus southeast of Houston. No subcontracted castings. No transfer-of-custody between vendors.
In-house spectral analysis verifies every heat. Carbon steel, low-temp carbon, stainless (304/316/321/347), duplex, super-duplex, and alloy grades (B7, B8, B16, Monel, Inconel) are poured under our own pour cards. Full traceability from bar stock to shipped valve is filed against the serial number, not the work order.
Five-axis CNC machining centers hold seat pockets to ±0.0005". Assembly is performed by tenured fitters — average tenure nine years — on jigs calibrated weekly. Every threaded body joint is torque-stamped with the operator badge and recorded in the unit's QA traveler.
Hydrostatic shell and seat tests per API 598 / API 6D, pneumatic low-pressure seat tests, and fire-safe burn tests on X-Series production lots are not sampled — they are performed on every valve. Test certificates, material certificates, and dimensional reports ship inside every crate.
